Ryobi ECS1519 Circular Saw: Discontinued — What to Buy Instead
A corded 1500W Ryobi circular saw from the DIY range. Retired years ago, and the replacement depends on whether you want corded or cordless.
Disclosure:As an Amazon Associate we earn from qualifying purchases. This costs you nothing and never changes which tools we recommend. Read more.
The ECS1519 was a corded 1500W circular saw in Ryobi’s green DIY range, sold widely through Bunnings and comparable retailers outside North America. It was never a trade saw and was not priced as one: a 185mm blade, a stamped base plate, and enough power for framing timber and sheet goods.
It is discontinued. Ryobi’s corded range has shrunk dramatically over the last decade as the company moved almost entirely to the ONE+ cordless platform, and the ECS model numbers went with it.
If you still own one
Corded tools age well. There is no battery to die, and the motor is the simplest part of the saw.
Two things wear out and both are fixable: the carbon brushes, which are a cheap consumable available generically, and the power cord, which on a saw that has lived in a garage is usually the first thing to fail at the strain relief.
The part that is not fixable is the base plate. A stamped steel base that has been dropped will not be flat, and a saw whose base is not flat and square to the blade will not cut straight no matter how good the blade is. Check it with a straight edge and a square before deciding whether to keep it.
What replaces it
Ryobi’s own answer today is the ONE+ cordless range rather than a corded saw, and if you already own ONE+ batteries that is the cheapest route back to a working saw.
If you want a saw that will outlast the one you are replacing, the Makita XSS02Z, linked below, is the sensible step up — bare tool pricing, a platform that has been supported for over a decade, and a build quality clearly above the DIY range this saw came from.
For corded work specifically, any current 7-1/4 in saw with a cast rather than stamped base is worth the modest extra: the base is the part that determines whether cuts stay square.